MILLER HARNESS 650CN-BDP/S/MGN UTILITIES,WIND,TOWER&CONSTRUCTION

Description

Miller Contractor Harness
Models: 650CN Series
Miller Contractor Harness
Models: 650CN Series
Description
The Miller Contractor Harness is specifically designed for use in
construction with the unique combination back D-ring pad/shoulder
pads that minimize discomfort/stress around the neck and
shoulders when using a tool belt. All harnesses come equipped with
a back D-ring and sub-pelvic strap.
Materials
Webbing:
1 ¾” Polyester
Elastic Keepers:
Polyester, Nylon, Lycra
Thread:
6 cord bonded 3 strand polyester
thread. Minimum tensile of 42 lbs
D-ring:
Clear Chromate Finished Carbon
Steel
Hardware:
Steel
Grommets:
Brass
Labels:
Valeron
Label Pack:
Evoprene, Nylon
*All hardware meets ASTM (50) fifty-hour salt spray test requirements.
Technical
Max. Working Load
: 400 lbs
(181kg)
Webbing Min.Tensile
: 5,000 lbs
(22kN)
D-ring Min. Tensile
: 5,000 lbs
(22kN)
Buckle Min. Tensile
: 4,000 lbs
(18kN)
Certification
Meets OSHA 1910.66, 1926.502 (d),
ANSI A10.32, Z359-2007 and
CSA Z259.10-06 specifications.
650CN-BDP/UGN
SKU
Side
D-Rings
Chest
Strap
Shoulder
Strap
Leg
Straps
Weight
Special
Features
650CN-BP/UGN
No
Mating
Friction
Tongue
4.42 lbs
(2kg)
D-ring pad / Shoulder pads / Pull-free lanyard rings / Belt loops /
4 ½” Belt Pad
650CN-BDP/UGN
Yes
Mating
Friction
Tongue
5.2 lbs
(2.3kg)
D-ring pad / Shoulder pads / Side D-rings / Pull-free lanyard
rings / Belt loops / 4 ½” Belt Pad
STORED IN CONTROLLED ENVIRONMENT.                                                                                                                                                                                                        SIZE: SMALL/MEDIUM FROM WEB SITE UP TO 5'9" TALL AND 190 LBS.
ANY QUESTION DUE ASK.
Buyer assumes all responsibility for the proper use of this equipment. Do not use without proper training. Injury or death may occur.
THANKS FOR LOOKING.